Brass Flare Fittings Supplier

K. K. International is a well-known Brass Flare Fittings Supplier in India. K. K. International was built up in the year 1981 and through its expert building aptitude, effectively settled itself as an exceptionally dependable maker, exporter, and broker of the scope of Precision Brass fitting Parts.

Through our innovative and distinguished quality products, which include Brass Compression Fittings, Brass Flare Fittings, Brass p u Tube Fittings, Brass Pipe Fittings, Brass valves & cocks, Brass Inserts, Brass Transformer Parts (LV, HV).

Flare fittings are a type of compression fitting used with metal tubing, usually soft steel, ductile (soft) copper and aluminum, though other materials are also used. Tube flaring is considered to be a type of forging operation and is usually a cold working procedure. During assembly, a flare nut is used to secure the flared tubing’s tapered end to the also tapered fitting, producing a pressure-resistant, leak-tight seal. Flared connections offer a high degree of long-term reliability and for this reason, are often used in mission-critical and inaccessible locations.

Flared fittings are appropriate alternatives to solder-type joints when the use of an open flame is either not desired or impractical. Copper tube used for propane, LP, or natural gas may use flared brass fittings of a single 45°-flare type, according to NFPA 54/ANSI. Z223.1 National Fuel Gas Code.

Flare fittings consist of a body with a flared or coned end. Special flaring tools are used to install the tube to fit inside the flared end, providing a deep seal. Flare fittings can handle higher pressures and a wider range of operating parameters than standard compression fittings.

These economical fittings resist mechanical pullout and disassembled repeatedly. Listed with Underwriter’s
It can be assembled and disassembled repeatedly.
Long dry seal pipe thread (Important: strictly in ACCORDANCE with the Standards) minimize leakage and provide more clearance for tightening flare nuts.
Grooved shapes, elbows, tees, etc…. Made from brass forgings to minimize the strength and eliminate cracks.
For flammable liquid, marine and gas applications.

We are a highly reliable manufacturer, exporter, and trader of a range of Compression Fittings. The range you can see that on our Brass Flare Fittings Page.

OUR PRODUCTS

Brass Compression Fittings